Logging Cable

From EvoEcu
Revision as of 20:04, 30 November 2009 by EdwardMarshall (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

There are a few cables that can be used to log and reflash data from the evo.

There have been a number of cables that can reflash and datalog Mitsubishi Vehicles.

OpenPort 1.0 (no longer available)

OpenPort 1.2 (no longer available)

OpenPort 1.3M (no longer available)

OpenPort 1.3D (available from www.limitless.co.nz/cables $57

 - Datalogging support EvoScan v2.6 - 1994-2008 Mitsubishi Datalogging support (excluding EvoX).
 - No reflashing support, this is a pure datalogging only cable.

OpenPort 1.3R (available from www.limitless.co.nz/cables $97

 - Datalogging support EvoScan v2.6 - 1994-2007(Evo4-9) Mitsubishi Datalogging support.
 - Same cable as OpenPort 1.3U except it does not include EcuFlash serial license.
 - Reflash rom supported only via EvoScan software for Evo 7/8 vehicles. 

OpenPort 1.3U (only available from www.limitless.co.nz/cables) $137

 - Supports the Latest EcuFlash v1.42 - Evo 7/8/9 flashing support.
 - Supports the latest EvoScan - Evo 7/8 flashing support. 1994-2007(Evo4-9) Mitsubishi Datalogging support.

OpenPort 2.0 (available from www.limitless.co.nz/cables $169 or tactrix.com $189)

 - Supports the Latest EcuFlash v1.42 - Evo 5/6/7/8/9/10 flashing support.
 - Datalogging support EvoScan v2.6 - 1994-2009 Mitsubishi Datalogging support including EvoX.

See ECU Development for schematics for the OpenPort 1.3U cable, as well as pinouts for the Evo ECUs, OBD-II, and diag plugs.