2-Byte Logging

From EvoEcu
Revision as of 22:11, 29 July 2008 by EdwardMarshall (talk | contribs) (New page: # Edit the EcuFlash XML for your rom to add the MUT table (instructions). # Find the documentation specific to your ROM in our [[:Categ...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  1. Edit the EcuFlash XML for your rom to add the MUT table (instructions).
  2. Find the documentation specific to your ROM in our master index, and look up the 2-byte load, RPM, and airflow addresses.
  3. Open up your ROM in EcuFlash, and open the MUT table (in the "Misc" section).
  4. Find the MUT chart locations for the 2-byte load, RPM, and airflow for your ROM, and enter the new addresses. For example, if your ROM is 96940011, change the value in the MUT0 row and 0 column to 899A and the 1 column to 899B to add 2-byte load. Do the same for RPM and for airflow.
  5. When logging in EvoScan, you can now enable 2-byte load, RPM and airflow!

Credit goes to Jack_of_Trades for his original thread on EvolutionM documenting this.